Installation

This guide walks you through deploying Kloak into your Kubernetes cluster. The entire process takes about two minutes.

Prerequisites

Before installing Kloak, make sure your environment meets the following requirements:

Requirement	Minimum Version	Notes
Kubernetes	1.28+	Tested in CI on k3s; other conformant distributions (EKS, GKE, AKS) are expected to work when the node kernel meets the requirement below
Linux kernel	6.6+	Required on worker nodes. The eBPF programs load on 5.17+ (bpf_loop), but the tc program that patches ciphertext attaches through TCX, which needs 6.6: on older kernels nothing is rewritten. Kernel BTF must be available.
Helm	3.x	Used for installing and managing Kloak
kubectl	1.28+	Configured with cluster access
cgroup v2	Enabled	Most modern distributions enable this by default
CPU architecture	amd64 or arm64

Checking your kernel version

Run the following on your worker nodes to verify kernel compatibility:

uname -r

The output should show 6.6 or higher (e.g., 6.8.0-45-generic). See Requirements for details.

eBPF requires privileged access

The Kloak controller runs as a privileged DaemonSet with CAP_BPF, CAP_NET_ADMIN, CAP_SYS_ADMIN, and CAP_SYS_RESOURCE. This is required to load eBPF programs and attach uprobes to container processes.

Install with Helm

Add the Kloak Helm repository and install:

helm repo add kloak https://chart.getkloak.io
helm repo update

helm install kloak kloak/kloak --version 0.1.0 \
  -n kloak-system --create-namespace

This installs chart version 0.1.0, which pulls the matching image ghcr.io/spinningfactory/kloak:0.1.0. Without --version, Helm installs the latest stable chart.

This creates the kloak-system namespace and deploys two components:

• kloak-controller -- A DaemonSet that runs on every node. It watches secrets, creates shadow copies, and loads eBPF programs to intercept TLS writes.
• kloak-webhook -- A Deployment that runs the mutating admission webhook. It intercepts pod creation and rewrites Secret volumes (volumes[].secret) to point to Kloak shadow secrets.

In auto certificate mode (the default), Helm generates a self-signed TLS certificate at install time, stores it in the kloak-webhook-certs secret, and sets the caBundle on the MutatingWebhookConfiguration. No manual certificate management is needed.

Verify the Installation

Check that all Kloak pods are running:

kubectl get pods -n kloak-system

You should see output similar to:

NAME                             READY   STATUS    RESTARTS   AGE
kloak-controller-abcde           1/1     Running   0          45s
kloak-webhook-6f7b8c9d10-xyz12   1/1     Running   0          40s

Wait for both pods to reach Running status.

You can also verify the components are healthy with rollout status:

kubectl rollout status daemonset/kloak-controller -n kloak-system --timeout=120s
kubectl rollout status deployment/kloak-webhook -n kloak-system --timeout=120s

Verify the Webhook

Confirm that the mutating webhook configuration was created and has a CA bundle:

kubectl get mutatingwebhookconfiguration kloak-mutating-webhook

# Should print the start of a base64-encoded certificate, not an empty line
kubectl get mutatingwebhookconfiguration kloak-mutating-webhook \
  -o jsonpath='{.webhooks[0].clientConfig.caBundle}' | head -c 40; echo

Customizing the Installation

The image tag defaults to the chart's version. Override any value in the Helm chart using --set or a custom values file:

helm install kloak kloak/kloak --version 0.1.0 \
  -n kloak-system --create-namespace \
  --set image.repository=ghcr.io/spinningfactory/kloak \
  --set image.tag=0.1.0

Or create a custom values file:

# my-values.yaml
image:
  repository: ghcr.io/spinningfactory/kloak
  tag: 0.1.0

controller:
  resources:
    requests:
      cpu: 100m
      memory: 128Mi
    limits:
      cpu: "1"
      memory: 1Gi

helm install kloak kloak/kloak --version 0.1.0 \
  -n kloak-system --create-namespace \
  -f my-values.yaml

Uninstall

To remove Kloak and all its resources from your cluster:

helm uninstall kloak -n kloak-system
kubectl delete namespace kloak-system

Shadow secrets created by Kloak in application namespaces are not automatically deleted. To clean those up:

kubectl delete secrets -l getkloak.io/managed=true --all-namespaces

WARNING

Removing Kloak while applications are running means pods will continue to see the shadow secret values (kloak:… placeholders) until they are restarted with the original secrets. Plan your rollback accordingly.

Next Steps

• Follow the Quick Start to protect your first secret in under five minutes.
• Review Configuration for controller and webhook tuning options.